Traver IDC | everything electrical

In Business Since 1938
1.800.TE.MOTOR
24 hours a day

testimonials

Pharmaceutical

"I wanted to thank all of you for assisting Boehringer Ingelheim Pharmaceuticals, Inc. in our Fume Hood Exhaust Fan Project at the R&D Complex. We really appreciate your help. It makes the job so much easier when you have good service-oriented people helping you out to make a successful installation."
John Finlay, PE
R&D Facility Engineer
Boehringer Ingelheim

Contracting

"I wanted to pass along a BIG THANK YOU for the great service that we received yesterday. We needed help with a motor on the roof that had been damaged. Traver IDC made arrangements and were at Plymouth Spring in a short time. The service technicians did a great job accessing the problem and getting the unit running temporarily before permanently installing the new motor. Thanks again."
Jack Haber
Vice President - Manufacturing
Plymouth Spring

Contracting

"Traver IDC has supplemented our mill E&I Department with several industrial electricians in order to help us cope with several large capital projects and time restrictive, high pressure shutdown projects. Through it all we received what we consider exceptional service from your electricians. We truly appreciate this type of service and encourage your company to maintain these standards of excellence."
Nick Tamburino
Project Engineer
Smurfit Stone Container

Water

"Thank you for your help in the clean up, repair and overall help in getting the Water Pollution Control Facility back on line after the unfortunate accidental power outage."
Art Paulone
Shift Operation Supervisor
City of Waterbury, Bureau of Waste Disposal

Motor Repair

"On behalf of PPG Industries, I would personally like to thank you for the work performed on our ventilation system. The motor rebuild was completed quickly which allowed us to get the ventilation system up and running with the least amount of down time possible."
William Fuller
Senior Project Engineer
PPG Industries Inc.

Supply

"Thank you on behalf of Waterbury Hospital for opening up your business on Sunday in order for us to get a motor for one of our blowers. Without your firm's capable assistance, we would have been unable to perform the surgery that was scheduled for Monday morning. We truly appreciate the special effort you put forth on our behalf."
Robert Palumberi
Director of Engineering
Waterbury Hospital

Motor Repair

"Thanks to the Traver IDC motor repair department for doing some leg-work that will improve our motor reliability and not just rebuilding the motor we sent you with no questions asked. This is why I consider Traver IDC our preferred motor supply and repair contractor"
Jeffrey Bowen
Engineering Manager
Arkema Inc.

Supply

"National Die Company purchased three Jettron Die Protection Units one year ago. These units work flawlessly. We have other makes of units in house but unfortunately, they are not "trouble free". When these units die, the Jettron is the way I will continue to go."
John Ernst
President
National Die Company

Engineering

"The (dynamic) balancing job on the fan was perfect and the fan is now running at speed with no problems. Traver IDC has always responded quickly to PPG's needs and this is greatly appreciated."
William Fuller
Senior Project Engineer
PPG Industries Inc.

Engineering

"I don't know what I can say about the people you sent in to work on our extrusion press. Their ability to understand the function of the systems in a very short period of time was outstanding. The technical expertise that your people brought to Ansonia was equal to the compassion that they also brought. All of our employees knew that our very future depended on how fast the repairs were made and your people acted like they worked for Ansonia with the concern and dedication they put into the project."
Carl Kreig
Vice President - Manufacturing
Ansonia Copper and Brass

Energy Conservation

"We are pleased with the result of the Energy Conservation Upgrade project performed by Traver IDC. The upgrades to our lighting, motors, drives, transformers, occupancy sensors, and computer monitors have significantly reduced our electric bill. We are on course to saving at least $12,000.00 per year in electricity costs!"
Richard Laurenzi
Vice President - Sales and Marketing
Prospect Machine

Energy Conservation

"Traver IDC recently completed an energy upgrade of our facility. Without the opportunity to receive the $80,000 of rebate dollars and the 0% loan, we wouldn't have funds available to upgrade to more environmentally friendly equipment and realize the savings that helps us cope with other tax increases and rising cost of doing business. Thank you for your help in making all of this possible."
Patrick Hayden
Vice President - Operations
Donham Craft

Metal Fabrication

"On behalf of Metallon, I want to thank you for the quick turnaround on the motor that Traver IDC removed for us and the repair of the motor. The motor has been re-installed and the machine is up and running."
Dennis Hayes
Plant Manager
Metallon

Aerospace

"The Traver IDC team was able to complete a large project task in a professional and innovative manner. Most importantly, the ten workers involved in the project were able to complete this project INJURY FREE. Thank you for buying into our culture of safety and for considering everyone's safety a priority. Thanks again for the high level of work."
Jeffrey Bowen
Engineering Manager
Arkema Inc.

Traver IDC
151-165 Homer St., Waterbury, CT 06704
t 203.753.5103 | f 203.573.9352

Copyright © 2008 Traver IDC. All rights Reserved. Design and hosting by The Worx Group. | Email the Webmaster.